DVR Setup

1. Go to web site http://www.dynamicipview.com , complete the on-line registration form.
2. Write down the information after you successfully submit the registration form:
Server Host, User Name, Directory, Password.
3. Log on to DVR, select "Main Menu", select "DVR SET UP", select "NETWORK".
4. On "NETWORK" setting menu, enter DVR's IP, subnet mask, gateway. Choose the desired service port and http port. If you are not sure which IP address and port should be used, please contact your network administrator or call our technical support for detail information.

5. Select "DDNS/PPPOE" setting menu.
• DDNS ENABLE: checked
• SERVER IP = 66.163.26.245
• SERVER HOST = (enter the host name that you have registered on-line into this box)
• PORT = 7070
• PPPOE: unchecked

Click "SAVE" and exit. It might prompt to restart your DVR system depending on different version of firmware and hardware.

6. Select "FTP" setting menu.
• UPLOAD ENABLE: checked
• FTP IP = 66.163.26.245
• FTP PORT = 21
• DIRECTORY = (enter the directory that you have registered on-line into this box)
• USERNAME and PASSWORD = (enter the user name and password that you have registered on-line into these boxes)

Click "SAVE" and exit. It might prompt to restart your DVR system depending on different version of firmware and hardware.